Shredder-Chippers

Why a hammermill style shredder-chipper?

If your lawn and garden debris clean up requirements are more than processing mostly leaves and a few small twigs and branches, one of the MacKissic hammermill style shredder-chippers is certain to meet your needs and exceed your expectations.

The heart of the Mighty Mac shredder-chipper is the shredding chamber or hammermill.  This hammermill houses free-swinging hammers that shred, tear, beat, and grind material until it is small enough to pass through the screen at the discharge end of the machine.

Our hammers are heat-treated and hardened, not sharpened or serrated like some others.  This process, and the four cutting corners of each hammer will provide years of life before replacement is necessary.

We currently offer machines with hammermills that house 16, 24, 36, and 48 hammers.  These hammers generate anywhere from 44,000 to over 114, 000 shredding hits per minute depending on the model.  The key to successful shredding and chipping is the centrifugal force created by the weight of the flywheel and rotor.  Our flywheel and rotor combinations range in weight from 24 lbs. in our smallest hammermill shredder-chipper to 148 lbs. in our largest.

The centrifugal clutch is another outstanding feature of our hammermill machines.  They are designed to provide easy no-load starting and offer engine protection not found with a direct drive machine.  The clutch will also disengage if the machine is overloaded.  This allows the engine, flywheel, and rotor RPM’s to quickly recover to full speed and complete the task at hand.

With five sizes to choose from, MacKissic offers the right hammermill shredder-chipper to satisfy your needs.

Model

LSC

LC800EZ

SC800

12P

SC1650

SC185

Engine
B&S 8 OR 11.5 Gross Torque OHV
B&S 8.0 Gross Torque OHV
B&S 8.0 Gross Torque OHV
B&S OR HONDA
B&S 16.5 Gross Torque OHV
Briggs and Stratton XR2100
Engine CC’s
206 OR 249
205
206
250 – 270
420
420
Start
Manual
Manual
Manual
Manual or Electric
Electric
Electric
Acreage
<1 acre
<1
<1 acre
1/2-4 acres
1/2-4 acres
4+ acres
Leaves
Yes
Yes
Yes
Yes
Yes
Yes
Kitchen Debris
No
No
Yes
Yes
Yes
Yes
Chipping Size
2-1/4”
2-1/4”
2-7/8″
3-1/2″
4″
4-1/2″
Shredding Hammers
None
None
16 Reversible
24 Reversible
36 Reversible
48 Reversible
Weight (lbs.)
140 – 160
128
152
235 – 275
337 – 444
700
Storage Space (L x Wheelbase X H)
53″ x 30″ x 27″
49″ x 24″ x 39″
38″ x 30″ x 43″
55″ x 37″ x 44″
61″ x 28″ x 48″
86″ x 53″ x 50″
MSRP*
$949 – $1,299
$1,169
$1,549
$2,199 – $3,299
$3,899 – $4,249
$5,899
 

*Note: Prices shown are suggested retail and do not include freight, dealer set up, or applicable local taxes in US Dollars. Prices and specifications are subject to change as new developments and improvements are made.

Parts List and Schematics

Accessories

 

SC800

(Older Models: SC703/SC705/SC752/SC763)

Part Number
Description
Weight
MSRP*
800-0015 Standard replacement 1″ diameter hole screen 3.3 lbs. $98.00
800-0069 Optional screen 1/4″ 3 lbs. $98.00
800-0049 Optional screen 1/2″ 3 lbs. $98.00
800-0070 Optional screen 3/4″ 3 lbs. $98.00
800-0011 Optional oblong stamped bar screen (3″ x 1-1/2″ oblong openings) 3 lbs. $98.00
800-0060 Optional rectangular welded bar screen (1-7/16″ x 4-15/16″ rectangular openings) 4 lbs. $135.00
800-0032 Water resistant fitted cover 1.3 lbs. $77.00
800-0144 Bagging kit 5.6 lbs. $135.00
800-0045 Replacement bag only 1 lbs. $72.00
500-0013 Leaf Tamper 1 lbs. $30.00
12P/PT/PTE
Part Number
Description
Weight
MSRP*
500-0004 Standard replacement 1″ diameter hole screen 4 lbs. $135.00
500-0052 Optional screen 1/4″ 4.2 lbs. $135.00
500-0053 Optional screen 1/2″ 4.2 lbs. $135.00
500-0054 Optional screen 3/4″ 4.2 lbs. $135.00
500-0055 Optional oblong stamped bar screen (3″ x 1-1/2″ oblong openings) 3.5 lbs. $135.00
900-0133 Optional rectangular welded bar screen (1-3/8″ x 7-1/8″ rectangular openings) 5.2 lbs. $166.00
108-0082 Optional pull handle kit 2 lbs. $72.00
908-0055 Water resistant fitted cover 2 lbs. $99.00
900-0116 Bagging kit (12P/12PT/12PTE) 4.5 lbs. $135.00
800-0045 Replacement bag only 1 lbs. $72.00
500-0013 Leaf Tamper 1 lbs. $30.00

SC1650E and SC1650HTE

(Older Models: SC150-12E/SC150HT-12E)

Part Number
Description
Weight
MSRP*
910-0048 Standard 1-1/4″ diameter hole screen 5.5 lbs. $198.00
910-0049 Optional screen 1-1/2″ x 4-3/4″ slotted screen 5.5 lbs. $198.00
910-0064 3/4″ diameter hole screen 5.5 lbs. $198.00
913-0066 Pull handle kit 5 lbs. $72.00

SC185

(Older Models: SC180/SC182/SC183)

Part Number
Description
Weight
MSRP*
911-0007 1-1/4″ diameter hole screen 8.2 lbs. $250.00
911-0054 Standard replacement bar screen 10.5 lbs. $250.00
911-0069 Light kit 2.5 lbs. $98.00
911-0075 Water resistant fitted cover 2 lbs. $124.00
911-0308 3/4″ diameter hole screen 8.2 lbs. $250.00

SC262

(Older Models: SC260)

Part Number
Description
Weight
MSRP*
912-3530 Light and fender kit 50 lbs. $250.00
912-2409 Discharge screen, standard bar grate 16 lbs. $312.00
912-2410 3/4″ diameter hole screen 5.5 lbs. $281.00
912-3531 Tongue Jack Caster 15 lbs. $46.00

Parts

Click for a SC800 parts list and exploded view. (pdf)

Click for a 12P parts list and exploded view. (pdf)

Click for a SC1650 parts list and exploded view. (pdf)

Click for a SC183 parts list and exploded view. (pdf)

Click for a SC262 parts list and exploded view. (pdf)