For over 60 years MacKissic has been manufacturing tough, durable products for the lawn & garden industry.

 
Mid-Tine Tillers

SUBURBAN

The Suburban is the choice of serious gardeners and will handle most tilling applications and soil conditions. The all
steel cross braced construction, welded handles and heavy duty hitch casting have stood the pounding of rental use for
decades. Real power that's easy to control!

 

 

 

INTERNATIONAL

The International achieves maximum tine torque by its triple gear reduction transmission and double V belt drive system. In the toughest soil conditions from red clay to hardpan and shale, this extra heavy duty tiller has outperformed its competition time and again. This is simply our BEST.

 
SPECS:

  • Engines Available: Briggs & Stratton 8.0 gross torque OHV or OHV IC, 6 hp Robin, or 5.5 hp Honda

  • Fuel Tank Capacity: 3 quarts
  • Starter: Recoil
  • Transmission: Commercial grade roller chain and heat
    treated sprockets operate in a continuous "00" grease bath
  • Throttle: Remote control
  • Clutch: V-belt with positive finger-tip control
  • Tine Shaft: 1-1/4" diameter, case hardened, ground and polished carbon steel
  • Frame: Rental tough construction
  • Handles: Steel with welded supports and cross brace  
  • Rear Wheels: Liftable, detachable, steel rimmed, solid rubber tires
  • Tines: All welded slasher tines as shown on unit above. Optional bolo tines available. Standard tilling width is 26".
  • Drag Bar: 3/4" x 1-1/4" steel notched adjustable
  • Hitch: One-piece casting with non-slip settings to accommodate tilling accessories
  • Shipping Weight: 141 lbs. with standard slasher tine assembly

SPECS:

  • Engine: Briggs & Stratton 8.0 gross torque OHV IC,  6 hp Robin or 5.5 hp Honda
  • Fuel Tank Capacity: 3 quarts
  • Starter: Recoil
  • Transmission: High-torque, rental quality transmission with heat treated sprockets and "00" grease bath lubrication
  • Throttle: Remote control
  • Clutch: High capacity double V-belt with positive finger-tip control
  • Tine Shaft: 1-1/4" diameter, case hardened, ground and polished carbon steel
  • Frame: Rental tough construction
  • Handles: Steel with welded supports and cross brace
  • Rear Wheels: Liftable, detachable, steel rimmed, solid rubber tires
  • Tines: All welded slasher tines as shown on unit above. Optional bolo tines available.  Tilling width adjusts to 14", 26" or 37" wide.
  • Drag Bar: 3/4" x 1-1/4" steel notched adjustable
  • Hitch: Heavy duty one-piece with non-slip settings to accommodate tilling accessories
  • Shipping Weight: 160 lbs. with standard slasher tine assembly