|
TPH122
Our TPH units require 1-3/8” six spline PTO with
clockwise rotation.
The rotor of our shredder-chippers must run at 2057 rpm –
(ideal is 2400 to 2600 – max is 2800).
|
TPH184
Our TPH units require
1-3/8” six spline PTO with clockwise rotation.
The rotor of our
shredder-chippers must run at 2057 rpm – (ideal is 2400 to 2600 – max is
2800).
|
|
SPECS:
Tractor Category Required: I or 0
Hammers-free swinging: 24
Knife: 1
Flywheel weight: 17 lbs.
Rotor shaft diameter: 1-3/16”
Shredder hopper throat: 9” x 5”
Chipper throat: 3-1/2” x 3-1/2”
Basic unit: 12 gauge steel
Frame: 3” channel
Supports: Skid style
Chipping Capacity: 3-1/2 inch
|
SPECS:
Tractor Category Required: I
Hammers-free swinging: 48
Knife: 1
Flywheel weight: 33 lbs.
Rotor shaft diameter: 1-7/16”
Shredder hopper throat: 6-3/4” x 14”
Chipper throat: 4-1/2” x 4-1/2”
Basic unit: 7 gauge steel
Frame: 3” channel
Supports: Skid style
Chipping Capacity: 4-1/2 inch
|
|
Note: Recommended
tractor horsepower for TPH122 – 10 hp to 30 hp max. Recommended tractor
horsepower for TPH184– 16 hp to 45 hp max. Category 0 = 5/8” diameter top
link and lift arm pins Category I = 3/4” diameter top link and 7/8” diameter
lift arm pins
Gross horsepower = tractor engine horsepower
PTO
horsepower = less horsepower needed to run PTO
PTO shredder-chipper must be operated
in the lowered position |
